Component Seal Product Developments


Grundfos Hilge manufacture a range of hygienic pumps for use in Food and Beverage, Pharmaceutical and Biochemical industries worldwide.

In response to market demand, AESSEAL® has developed the M010S1, M010S2 & M010S3 mechanical seals to suit Grundfos Hilge pumps, thus further developing the comprehensive component seal product portfolio already available.

The M010S1 component seal has been designed to suit the Hilge Hygiana pump. The seal is offered in 2 sizes: 28mm and 38mm, and is supplied in Carbon versus Silicon Carbide, or Silicon Carbide versus Silicon Carbide, with EPDM elastomers.

component seal M010S1       component seal M010S1

The 28mm M010S2 component seal is for use on the Hilge Hygia and Euro-Hygia pumps; supplied in Carbon versus Silicon Carbide, or SiliconCarbide versus Silicon Carbide, with EPDM elastomers.

component seal M010S2     component seal M010S2

The M010S3 component seal is designed to suit the Hilge Sipla pump. This 28mm seal is supplied in Carbon versus Silicon Carbide, or Silicon Carbide versus Silicon Carbide, with EPDM elastomers.

component seal M010S3      component seal M010S3

Installing any of these mechanical seals is easy as no setting screws exist and the working length of all 3 seals is set automatically when the pump is reassembled.

Each of these multiple sprung component seals have also been designed to be robust, internally balanced and non-clogging, making the seals the perfect choice for sealing your Grundfos Hilge pumps.

Further details on all of these component seals can be found in the Product Range section of the website or email rachel.bestwick@aesseal.co.uk for further information.

 

          

 



  Released at:
14:00 19/12/2008


Go back